Collinite No. 390 Pre-Wax Auto Polish
All new clear-coat safe micro abrasive finishing polish eliminates minor paint defects like fine scratches/swirls, water spots, mild oxidation, clay marring, and wash marks from the surface. Finishing down to impart a smooth, high gloss shine while facilitating the easy application- and improving the bond- of any of Collinite's last step durable wax coatings: 845, 476, or 915. Not for use on rubber or black trim.
Place finger over cap and shake well before using. Surface should be pre-cleaned (washed), dry and feel lukewarm to the touch. For best results use DA polisher. BY MACHINE: Apply 3 pea-sized drops of No. 390 to preferred foam pad of choice. Work product into 2ft x 2ft section with firm pressure until clear residue appears, and remove with dry microfiber towel. Do not dry buff. BY HAND: Apply small amount of product to microfiber applicator pad and spread evenly across 1ft x 1ft section at a time. Rub as necessary until product begins to dry. Immediately remove with microfiber towel. To obtain added shine and protective durability on polished surfaces, follow up with one of Collinite's last step waxes (No. 845, 476 or 915)